11PC 1/2″ & 22mm DRIVE GO-TROUGH IMPACT SOCKET SET – SAE
Sockets: CR-MOGo-Through Impact Socket: 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″, 15/16″, 1″
By attaching to the outside of the socket they also allow the socket to be built up to 50% shorter and with 20% less width which is an advantage in some situations. Pass-through sockets and ratchets are built for 1⁄4-inch, 3⁄8-inch and 1⁄2-inch sets in both SAE and metric sizes. By using a fine tooth ratchet and socket system that allow a pass-through ratchet to be used as a conventional ratchet handle with interchangeable 1⁄4-inch and 3⁄8-inch drives some ratchets can be used with standard sockets.
10PC 1/2″ DRIVE IMPACT TORQUE EXTENSTION BAR – SAE
Sockets: CR-MO1/2″ – 195L:
65FtLbs, 90Nm Green
75FtLbs, 100Nm Black
80FtLbs, 110Nm Yellow
90FtLbs, 120Nm Red
100FtLbs, 135Nm Blue
110FtLbs, 150Nm Orange
120FtLbs, 160Nm Grey
130FtLbs, 175Nm Brown
140FtLbs, 190Nm White
150FtLbs, 200Nm Light Blue
24PC 1/2″ DRIVE IMPACT SOCKET SET – METRIC
Sockets: CR-MO1/2″ Short Socket: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm
1/2″ Long Socket: 17mm, 19mm, 21mm, 22mm
Extension Bar: 1/2″ x 75L, 1/2″ x 125L, 1/2″ x 250L
Swivel Adapter: 1/2″(F) x 1/2″(M)
9PC 1/2” DRIVE TORQUE STICK AND PROTECTIVE SLEEVE SOCKET SET – METRIC
Sockets: CR-MO
Sleeve: PP1/2″ x 195L Torque StickS:
65FtLbs, 90Nm Green
80FtLbs, 110Nm Yellow
100FtLbs, 135Nm Blue
120FtLbs, 160Nm Grey
140FtLbs, 190Nm White
1/2″ X 85L COLOR ED-COATED IMPACT SOCKETS: 17mm, 19mm, 21mm, 22mm