19PC 1/4″ DRIVE GO-THROUGH ANTI-SLIP SOCKET SET – METRIC
Sockets: CR-VAnti-slip Sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
Ratchet Wrench: 5″ Long 11mm Double Box End
Anshun Tiger Grip® are invented to remove stubborn hex fasteners. Patented Anti-Slip design is perfect to remove or tighten up to 85% corner worn hex head. Yes, bi-directional anti-slip makes Anshun Tiger Grip® better than all other ant-slip sockets in the market. While working on non-worn hex fasteners, the flank design makes sure Anshun Tiger Grip® does not bite on the surface and leaves no markings. Go-through design also allows the socket to be built up to 50% shorter and with 20% less width which is an advantage in some situations. By using a fine tooth ratchet and socket system that allow a pass-through ratchet to be used as a conventional ratchet handle with interchangeable 1⁄4-inch and 3⁄8-inch drives some ratchets can be used with standard sockets.
41PC 1/4″ DRIVE RATCHET SOCKET & BIT SET – METRIC
Sockets: CR-V
Bits: S21/4″ Short Socket: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm
1/4″ x 37L Bit Socket: SL4, SL5.5, SL7, H3, H4, H5, H6, H7, H8, PH1, PH2, PH3, PZ1, PZ2, PZ3
1/4″ Ratchet Handle: TPR Grip
1/4″ Universal Joint
1/4″ Spinner Handle
1/4″ Extension Bar: 50mm & 100mm
1/4″ Flexible Extension
1/4″ Sliding T-Handle
42PC 1/4″ DRIVE GO-THROUGH ANTI-SLIP SOCKET SET – LOW PROFILE
Sockets: CR-V
Bits: S21/4″ x 25L Bits: PH0, PH1, PH2, PH2, PH2, PH3, PZ1, PZ2, PZ3, SL5/32, SL3/16, SL1/4, S1, S2, S2, S3, H1/8, H5/32, H3/16, H7/32, H1/4, H3/32, T10, T15, T20, T25, T27, T30, T40, AD1/4
1/4 GO THROUGH Anti-Slip Sockets: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
Extension Bar: 1/4″ x 100L
Ratchet Wrench: 1/4″ x 90T / Double-Box-End
46PC 1/4″ DRIVE RATCHET SOCKET & BIT SET – METRIC
Sockets: CR-V
Bits: S21/4″ Short Socket: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm
1/4″ x 37L Bit Socket: SL4, SL5.5, SL7, H3, H4, H5, H6, H7, H8, PH1, PH2, PH3, PZ1, PZ2, PZ3, T10, T15, T20, T25, T30, T40
1/4″ Ratchet Handle: Full TPR Grip
1/4″ Universal Joint
1/4″ Spinner Handle
1/4″ Extension Bar: 50mm & 100mm
1/4″ Flexible Extension Bar
1/4″ Sliding T-Handle
1/4″ Bit Adapter
Hex Key: 1.27mm, 1.5mm, 2mm, 2.5mm